Gremsy T3 Lightweight Drone Gimbal: Lightweight Drone Camera Stabilizing Gimbal with Rapid Setup

Gremsy is one of the leading manufacturers of camera gimbal stabilizers for drones as well as unmanned aerial vehicles. Gimbals are designed for the purpose of mappers, surveyors and professional aerial filmmakers. It supports a variety of drones and payloads, and provides the smoothest footage. If you are looking for highest quality results for a range of commercial and industrial applications, this could be your choice.

Gremsy T3: Made for Different Types of Industrial Applications

The Gremsy T3 is one of the most powerful and a lightweight 3-axis camera stabilizing gimbal. It features HDMI Hyper Quick Release functionality, which enables connection with just a push and twist-lock movement. If you are looking for a gimbal that can give you tool-free balancing and easy plug-and-play installation, then it should be your choice. The best thing is it allows operators to set up cameras and be ready to fly within a few seconds.

 

The T3 can receive power directly from the drone battery, and the gimbal’s integrated 14.5V regulator allows you to power additional systems, like 3^rd party flight controllers, remote control systems and other accessories, to name a few. The I/O capabilities, all are located on the Hyper Quick Release mechanism for the sake of quick as well as intuitive connection, include USB, serial, CAN, SBUS and a 9-signal auxiliary port for functions, such as camera trigger, PWM control and AV signals. Integrated Bluetooth functionality not only allows convenient control of the T3 gimbal via Smartphone but also tablet or other suitable device.

You will get all new features with Gremsy T3. An integrated temperature-controlled and heated IMU, inside an aluminium housing, which provides high-accuracy operation, that is good even in extreme temperature conditions. The best thing is Gremsy’s gMotion controller gives professional-level stabilization with 32-bit resolution as well as correction updates at up to 2000 Hz. You will get smoother and superior-quality footage.

You will be amazed to know that Gremsy T3 is compatible with Pixhawk FC to support its autonomous flight inspection system. This can be easily controlled through Lightbridge 2 when utilizing A3 or N3 FC and be utilized with multiple RC, like SBUS, PPM or SPECTRUM. 

Endnote

It is seen that when workers work with transmission lines that are sometimes located in mountains or remote areas, making on-foot or helicopter inspections become difficult, time-consuming and dangerous. But inspections depend on manual labor does not always capture accurate data for a proper assessment.

It is also seen that manual inspections are time-consuming, and expensive, for example 150-mile of power and 2,000 plus transmission poles takes all but 2-week when performed on foot of 15-20 workers. It could take one day by helicopter, but the cost can be prohibited and the data quality insufficient, which is why Gremsy T3 is the best option to do that task in minimum time with accuracy.

You can pair it up perfectly with the drone to perform seamlessly in the air. The gimbal demonstrated the practical as well as highly efficient operation of the latest drone technology beyond the visual range. That is the power of technology and important for those who like to operate electric grids and for anyone who has some form of infrastructure to monitor without any interruption.

In the end, it would be advised to buy Gremsy T3 from a trusted seller, and for that matter Air-Supply is second to none! It prides in innovation. They strive for the boldest as well as brightest products to propel this industry forward. Not to worry at all! Like you, they are also pilots; due to the reason they are keen in what they are doing, so feel free to get in touch with Air-Supply today!